molecular science analysis of molecular structure medical science optical computer tomography biochemistry fast gene sequencing material engineering semiconductor analysis crystal research lidar high sensitivity qe: 12 % (-61), 36 % (-63), 40 % (-64) high speed rise time: 200 ps (-61), 180 ps (-63/-64) irf a (instrument response function) : 150 ps at fwhm: (-61) 80 ps at fwhm: (-63/-64) compact profile effective photocathode: 10 mm diameter (overall length: 70.2 mm, outer diameter: 45.0 mm) figure 1: spectral response information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?2015 hamamatsu photoni cs k.k. subject to local technical requirements and regulations, availability of products included in this promotional material may var y. please consult with our sales office. tpmhb0179eb tpmhb0756ea figure 2: typical gain 200 400 600 800 700 1000 300 500 900 0.01 0.1 wavelength (nm) 1 10 100 1000 radiant sensitivity (ma/w) quantum efficiency (%) r3809u-64 r3809u-61 r3809u-63 microchannel plate- photomultiplier tube (mcp-pmt) r3809u-61/-63/-64 -2.0 -2.2 -2.4 -2.6 -2.8 -3.0 -3.2 -3.4 10 2 10 3 supply voltage (kv) 10 4 10 5 10 6 10 7 current gain features applications
mcp-pmt r3809u-61/-63/-64 specifications parameter r3809u-61 r3809u-63 r3809u-64 unit spectral response peak wavelength photocathode material window material effective photocathode diameter stage of mcp b weight operating ambient temperature storage temperature 370 to 920 750 to 850 gaas 280 to 720 550 to 650 gaasp 280 to 820 550 to 650 extended red gaasp borosilicate glass 10 2-stage filmed mcp 100 -50 to +50 -50 to +50 nm nm mm g c c general parameter r3809u-61 typ. r3809u-64 unit cathode sensitivity luminous d radiant e quantum efficiency e rise time g fall time h irf (fwhm) a 700 85 12 3 10 5 20 i 200 500 150 max. min. 400 1 10 5 r3809u-63 typ. 750 160 36 3 10 5 2 10 4 180 400 80 max. min. 450 27 1 10 5 typ. 700 180 40 3 10 5 1 10 4 180 400 80 max. min. 400 30 1 10 5 a/lm ma/w % s -1 ps ps ps characteristics (at +25 c) parameter r3809u-61 r3809u-63 r3809u-64 unit supply voltage average anode current pulsed peak current c voltage divider current note: -3400 b 100 350 110 v na ma a maximum rating r3809u-61/-63/-64 a irf stands for instrument response function which is a convolution of the pulse function (h(t)) of the measuring system and the excita- tion function (e(t)) of a laser. the irf is given by the following formula: irf = h(t) e(t) we specify the irf as an fwhm of the time distribution taken by using the measuring system in figure 5 that is hamamatsu standa rd irf measurement. it can be temporary estimated by the following equation: (irf (fwhm)) 2 = (tts) 2 + (tw) 2 + (tj) 2 where tw is the pulse width of the laser used and tj is the time jitter of all equipments used. an irf data is provided with th e tube pur- chased as a standard. transit-time spread (tts) is the fluctuation in transit time between individual pulse and specified as an fwhm (full width at h alf maximum) with the incident light having a single photoelectron state. b two microchannel plates (mcp) are incorporated as a standard but we can provide it with either one or three mcps as an option d epend- ing upon your request. the pmt supply voltage varies depending on the number of mcps. c this is specified under the operating conditions that the repetition rate of light input is 100 hz or below and its pulse width is 70 ps. d the light source used to measure the luminous sensitivity is a tungsten filament lamp operated at a distribution temperature of 2856 k. the incident light intensity is 10 -4 lm and 100 v is applied between the photocathode and all other electrodes connected as an anode. e measured at the peak sensitivity wavelength. f at 30 min after high voltage is applied with shutter closed g this is the mean time difference between the 10 % and 90 % amplitude points on the output waveform for full cathode illuminatio n. h this is the mean time difference between the 90 % and 10 % amplitude points on the tailing edge of the output waveform for full cathode il- lumination. i at -30 c gain (at -3000 v) anode dark count f (at -3000 v) time response
figure 3: typical output waveform tpmhb0757ea tpmhc0232ed figure 4: block diagram of output waveform measuring system figure 5: typical instrument response function (irf) a tpmhb0759ea tpmhc0233ed figure 6: block diagram of irf measuring system tpmhb0758ea tpmhb0922ea r3809u-61 r3809u-63/-64 r3809u-61 r3809u-63/-64 0.2 (ns/div) 10 (mv/div) supply voltage rise time fall time width : -3000 v : 200 ps : 500 ps : 400 ps 0.2 (ns/div) 50 (mv/div) supply voltage rise time fall time width : -3000 v : 180 ps : 400 ps : 300 ps picosecond light pulser hamamatsu model#plp-01 wavelength: 410 nm pulse width (fwhm) : 35 ps nd filter oscilloscope high voltage power supply computer r3809u-61/-63/-64 trigger in 50 ? load hamamatsu c9727 trigger out picosecond light pulser hamamatsu model#plp-01 wavelength : 410 nm pulse width (fwhm) : 35 ps nd filter high voltage power supply computer delay hamamatsu c5594 hamamatsu c9727 tennelec tc-454 ortec 425a ortec 457 trigger out r3809u-61/-63/-64 mca cfd amp tac start stop 10 0 10 1 10 2 10 3 10 4 0.5 (ns/div) relative counts fwhm: 150 ps 10 0 10 1 10 2 10 3 10 4 0.5 (ns/div) relative counts fwhm: 80 ps
tpmh1295e07 may 2015 ip figure 7: dimensional outlines (unit: mm) r3809u-61/-63/-64 tpmha0522ea accessories mcp-pmt r3809u-61/-63/-64 hamamatsu photonics k.k. hamamatsu photonics k.k., electron tube division 314-5, shimokanzo, iwata city, shizuoka pref., 438-0193, japan, telephone: (81)539/62-5248, fax: (81)539/62-2205 www.hamamatsu.com u.s.a.: hamamatsu corporation: 360 foothill road, bridgewater. n.j. 08807-0910, u.s.a., telephone: (1)908-231-0960, fax: (1)908-231-12 18 e-mail: usa@hamamatsu.com germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49)8152-375-0, fa x: (49)8152-2658 e-mail: info@hamamatsu.de france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: (3 3)1 69 53 71 00, fax: (33)1 69 53 71 10 e-mail: infos@hamamatsu.fr united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, united kingdom, tele phone: (44)1707-294888, fax: (44)1707-325777 e-mail: info@hamamatsu.co.uk north europe: hamamatsu photonics norden ab: torshamnsgatan 35 se-164 40 kista, sweden, telephone: (46)8-509-031-00, fax: (46)8-509-031-01 e -mail: info@hamamatsu.se italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese (milano), italy, telephone: (39)02-93581733, fax: (39)02-93581741 e-mail: info@hamamatsu.it china: hamamatsu photonics (china) co., ltd.: b1201 jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020, china , telephone: (86)10-6586-6006, fax: (86)10-6586-2866 e-mail: hpc@hamamatsu.com.cn 45.0 0.3 2.8 0.2 4.2 0.1 7.0 0.2 52.5 0.5 70.2 0.5 shv-r connector (-hv input) aluminum housing case sma-r connector (output) photocathode effective photocathode diameter 10 min. 13.7 0.2 thermoelectric cooling unit c10373 series specifications cooling heat exchange medium cooling temperature (with cooling water at +20 c) ac input voltage .................. thermoelectric cooling using peltier module .................. water .......................................... approx. -30 c ................ 100 v to 240 v specifications frequency response range voltage gain input/output impedance noise figure (nf) supply voltage supply current ......... 50 khz to 1.5 ghz .......................... 36 db (typ.) .................... 50 ? .................... 5 db (typ.) ................... +12 v to +16 v .................... 95 ma (max.) high speed amplifier c5594 series specifications output voltage maximum output current line regulation against 10 % line voltage change ab (max.) load regulation against 0 % to 100 % load change a (max.) ripple / noise (p-p) ab (typ.) drift (after 30 min warm-up) ab (typ.) temperature coefficient ab (max.) ac input voltage power consumption ab (max.) bench-top high voltage power supply c9727/-01 .................. 0 v to -3500 v ................. 2 ma ........................ 0.005 % ............................ 0.03 % ....... 0.003 % ................................................ 0.05 % / h .. 0.01 % / c ................... 100 v to 240 v .. approx. 60 v a note: a at maximum output voltage b at maximum output current
|
